PDA

View Full Version : would this work?



michael454rs
11-30-2009, 06:03 PM
is it be possible to make this ram air intake intake work on the angled tb. just cut off the that small hose tube and install the iat sensor there.

http://cgi.ebay.com/ebaymotors/DAKOTA-DURANGO-97-98-99-00-03-SHORT-RAM-AIR-INTAKE_W0QQitemZ290374295674QQcmdZViewItemQQptZMot ors_Car_Truck_Parts_Accessories?hash=item439ba8207 a

what about this vette one

http://cgi.ebay.com/ebaymotors/97-04-Chevy-Corvette-5-7L-C5-Short-Ram-Air-Intake-98-99_W0QQitemZ360212345112QQcmdZViewItemQQptZMotors_ Car_Truck_Parts_Accessories?hash=item53de543118

i dont think thers prob no gain on the double pipping but i think i would work also

i think it can work what do you guys think.

fbodyrs96
11-30-2009, 06:07 PM
why not just get one made for the angle tb

http://www.v6f-body.com/picture.php?albumid=28&pictureid=351

Crazed98Camaro
11-30-2009, 06:13 PM
Unless you have some sort of ram air hood (Ultra Z hood) I don't think you will ramming air in as much as taking in heat soaked air from the engine.

On topic, I don't know if either would work.

truekoa
11-30-2009, 06:23 PM
I think those are too short but you can prob make it work. It looks like it'll hit the fuse boxes though, the piping will need to extend towards the fuse box and then down through the radiator support to the driver side wheel well.

The double one I really doubt works. the other side of the piping with the filter will hit the A/C condenser for sure. And with the cone filter sitting that close to the engine I dont know if you'll really be sucking any "cool" air into it.

michael454rs
11-30-2009, 06:30 PM
why not just get one made for the angle tb

http://www.v6f-body.com/picture.php?albumid=28&pictureid=351


where did u purchase you intake set up it looks good, the only thing is that i dont want it to go all the way to the bottom maybe i can cut the pipping to fit the filter around the fuse box.

fbodyrs96
11-30-2009, 10:02 PM
ebay.. seller chromeintakes....just so you, I have a small hole cut in the bottom cover to let air in to the filter and I do drive it in the rain sometimes and I have never seen water inside that area before.

truekoa
11-30-2009, 10:36 PM
yep chromeintakes off ebay was the exact same vendor i got my cai from before I switched to the SLP tray intake.

SpeedingFirebird
11-30-2009, 11:18 PM
Unless you have some sort of ram air hood (Ultra Z hood) I don't think you will ramming air in as much as taking in heat soaked air from the engine.

On topic, I don't know if either would work.

yeah, there is nothing "ram air" about either of those intakes.

michael454rs
12-01-2009, 01:47 PM
i saw at autozone that they sell those spectre polished aluminum peaces, is there any differences cause its polished al uluminum, ima going to try and fav up one out 3in pipe.

Will
12-01-2009, 10:36 PM
Mike dude, the best bang for your buck is the chrome intake

fbodyrs96
12-01-2009, 10:56 PM
Mike dude, the best bang for your buck is the chrome intake

agreed:dood: