PDA

View Full Version : intake question



straightnastyv6
11-09-2011, 10:35 PM
im thinking about pulling my intake off and cleaning it up is this the gaskets set i need it says that it does not have the upper gaskets set?
http://www.autozone.com/autozone/parts/Felpro-Intake-Manifold-Gasket/1998-Chevrolet-Camaro/_/N-j9rm9Zaliz2?counter=0&itemIdentifier=217566_259711_5297_

3.8blackmaro
11-09-2011, 10:55 PM
Are you only pulling off the upper intake or both the upper and lower. The one you have listed is just the lower intake gaskets. You would also need the upper intake gaskets and seals, coolant elbows, and throttle body gasket if you take that off.

straightnastyv6
11-09-2011, 11:30 PM
i just waant to take off the top thats it

3.8blackmaro
11-10-2011, 12:11 AM
Then all you need is the upper set.

xpbr2000
11-10-2011, 01:42 AM
this is the upper set here (http://www.autozone.com/autozone/parts/Felpro-Intake-Plenum-Gasket/1998-Chevrolet-Camaro/_/N-j9rm9Zaljji?counter=0&itemIdentifier=231492_0_7571_)

if your only going down this far:
http://www.frankforged.com/forge/images/cars/96camaro/operationx/2011-04-30_19-59-19_54.jpg

freakv6
11-11-2011, 12:20 PM
And fyi you could also pass on the tb gasket if you wanted, as it doesnt have to be disconnected.