Results 1 to 2 of 2

Thread: Installing Cold Air Induction's CAI on LFX Engine

  1. #1
    ChibiBlackSheep's Avatar
    ChibiBlackSheep is offline Sergeant Major LS PLUS Supporting Membership
    Site Moderator
    Join Date
    Sep 2011
    North Wales, PA
    Rep Power

    Default Installing Cold Air Induction's CAI on LFX Engine

    Just received and installed my cold air inductions CAI and figured I might as well add a little how-to

    Step 1, unwrap!

    Step 2, Pop the trunk, Remove the spare tire (if applicable), disconnect negative battery terminal.

    Step 3, Remove engine cover, un-clip the MAF sensor

    Step 4, Un-clamp the hose on the TB, pull the vacuum hose off the stock intake, remove the 2 10MM bolts holding the stock intake (using a deep socket) and just lift and remove!

    Step 5, Remove airbox lid, and place box in position and bolt down using 1 of the 10MM bolts you removed in step 4.

    Step 6, Put the MAF into the new ceramic coated tube.

    Now you just need to put the system together. Put the Ceramic pipe into the filter and tighten. Add the hose provided for the PCV system, connect the elbow to the ceramic pipe. Add the lid and clamp everything down!

    Then just throw the engine cover back on, and enjoy!

    Last edited by ChibiBlackSheep; 06-15-2013 at 12:26 PM.

    2013 Camaro 1LS | 00 Monte Carlo SS | 68 Camaro SS

  2. #2
    xpbr2000's Avatar
    xpbr2000 is offline Freaky Poster LS PLUS Supporting Membership
    Join Date
    May 2010
    Mooreville, MS
    Rep Power


    Very nice. I like the window... shows you whats really going on in there

    96 Camaro Cam'd anti-Coupe
    Dyno'd @ 213 RWHP (NA)
    OperationX thread
    OperationX blog

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts