Results 1 to 5 of 5

Thread: 3.1 to 3.4 swap

  1. #1
    Join Date
    Sep 2015
    Posts
    2
    Rep Power
    9

    Default 3.1 to 3.4 swap

    Hi im new to v6 f-bodys had acouple irocs,74 z28,elco and im now into v6s I currently have a3.1 hybrid grand prix (selling) I was recently given a 91 firebird 3.1 5speed and im looking into buying a 3.4 camaro/fb and building that motor while I drive my firebird. Now my question is what do I need to do to swap to the 3.4 I know its got coil pacs in place of the distributor but other than that both are 60degree motors both are sfi (I think) ans both are obd1 now whsts the main differences in wireing,mounting and computer compatibility and I guess most important will it bolt up to my t5 transmission?

    Sent from my SAMSUNG-SGH-I437P using Tapatalk

  2. #2
    xpbr2000's Avatar
    xpbr2000 is offline Freaky Poster LS PLUS Supporting Membership
    Administrator
    Join Date
    May 2010
    Location
    Mooreville, MS
    Posts
    11,670
    Rep Power
    100

    Default

    i'm pretty sure both 3.1 and 3.4 have the same bolt pattern on the bell housing. I can't know for sure though. i don't have either.

    you will need the PCM and the engine harness. hopefully the 91 body harness didn't change too much when it changed to 4th gen in 93

    Fasteddi is one of our 3rd gen gurus. i'm sure he'll chime in soon.

    96 Camaro Cam'd anti-Coupe
    Dyno'd @ 213 RWHP (NA)
    OperationX thread
    OperationX blog
    FrankForged.com

  3. #3
    Join Date
    Sep 2015
    Posts
    2
    Rep Power
    9

    Default

    I've talked to him before about turbocharging a 3100 didn't think of asking about the swap

    Sent from my SAMSUNG-SGH-I437P using Tapatalk

  4. #4
    Join Date
    Sep 2012
    Location
    Ohio
    Posts
    223
    Rep Power
    12

    Default

    Sorry for not responding. Been a crazy summer. And I have a mini fasteddi on the way!!!

    But yes a v6 t5 will bolt right up to a 3.4 or a 3.1 or a 2.8 only difference is there will be a pilot bushing in the crank if it had a manual trans hooked to it last.
    Last edited by fasteddi; 10-17-2017 at 07:01 AM.
    Best 1/4mile. 11.23 At 123mph(14.5PSI)
    11.70@115Mph Pass
    https://www.youtube.com/watch?v=BoxC...aSKRMi9Jn94Ubg

  5. #5
    Join Date
    Sep 2012
    Location
    Ohio
    Posts
    223
    Rep Power
    12

    Default

    Ahh you are tossing a 3.4 into a 3rd gen?? Easy man. All you have to do is toss it in. Change a few wires for the ignition to be dis. Change the tune which I can help you with. And you are done. It's quite simple. But I would recommend making it a hybrid top end and ditching the sfi injection .

    This write up I did should help. Remember hybrid swap or not. A 3.4l swap into a thirdgen is the same minus the little things such as a throttle cable or t stat housing. Look at the dis ignition wiring in the write up as it will be the same weather it's a hybrid swap or 3.4 swap.

    https://www.thirdgen.org/forums/v6/7...eddis-set.html
    Last edited by fasteddi; 10-17-2017 at 07:06 AM.
    Best 1/4mile. 11.23 At 123mph(14.5PSI)
    11.70@115Mph Pass
    https://www.youtube.com/watch?v=BoxC...aSKRMi9Jn94Ubg

Thread Information

Users Browsing this Thread

There are currently 4 users browsing this thread. (0 members and 4 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •