Results 1 to 2 of 2

Thread: 3800 series 2 factory m90 (ls7) supercharger

  1. #1
    Join Date
    Dec 2017
    Posts
    30
    Rep Power
    2

    Default 3800 series 2 factory m90 (ls7) supercharger

    Hey guys I recently upgraded my v6 firebird to fit a 3800 series 2 super charger but it only adds around 50 horsepower and I wanted to see if anyone knew the bigger superchager with the same bolt pattern

    Sent from my LG-LS993 using Tapatalk

  2. #2
    xpbr2000's Avatar
    xpbr2000 is offline Freaky Poster LS PLUS Supporting Membership
    Administrator
    Join Date
    May 2010
    Location
    Mooreville, MS
    Posts
    11,590
    Rep Power
    100

    Default

    I assume you are using the L67 blower? it should make more than 50HP. stock L67s from GTPs are rated 270 from the factory. that is 70 more than the stock 3800.

    from there you can reduce the pulley size to add more psi i believe to get a few more horses. if you used the 3800 heads it could be where you are losing some hp the L67 has different heads which could be better flowing. what other mods do you have to support the SC.

    Cam
    Headers
    Injectors
    Tune

    all those can add hp and greatly improve the SC gains. i'm running 42# injectors, cam, headers, and tune on a NA setup and getting close to 50 hp gains

    as for another SC you can look up an holden m90 SC. i believe that will bolt up to the 3800. I don't know the specs of the sc but they will be very similar. if you have no supporting mods its going to be hard to push hp out of the motor. you will be better off using a turbo. even then the stock camshaft will only be so effective dealing with boost and you could detonate the block.

    96 Camaro Cam'd anti-Coupe
    Dyno'd @ 213 RWHP (NA)
    OperationX thread
    OperationX blog
    FrankForged.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •